Technical Literature Technical Literature

Technical Literature

SU-TON opens technical literature focusing on literature with the wastewater industry. Collected the latest submissions of the wastewater industry works with the latest selection of free, almost all of the environmental protection people can download free articles in SU-TON. Updated daily.

  • Principle of 350 square chamber filter press XMYZGF350/1500-U

    350 sq.ft. chamber filter press XMYZGF350/1500-U Reinforced polypropylene diaphragm chamber filter press technical parameters Specification XMYZGF350/1500-U Filtration area 350m2 Filter chamber volume 5.3m3 Number of filter plates/diaphragm plates 45pcs Specification of filter plate/diaphragm plate 1500×1500×80/85 Filter plate...

  • Programmable high pressure diaphragm filter press xmzg250-1250-u

    XAYZGF250/1250-UK Technical Data Sheet Serial number Name Technical Parameters 0 Equipment name Reinforced polypropylene diaphragm filter press 1 Specification XAYZGF250/1250-UK 2 Filtration area 250 square metres 3 Filter chamber volume 3.75m3 4 Filter plate Quantity Filter plate 47 pieces (including head and tail plate...)

  • Parameters of 150 sq. ft. filter press

    XMYZ150/1070-U Technical Parameter Table XMYZ150/1070-U technical parameter table Specification Model XMYZ150/1070-U Filtration area 150m2 Filter chamber volume 2.25m3 Number of filter plates 75 pieces (including head and tail plate) Specification of filter plate 1070×1070×60 Filter plate material Reinforced polypropylene Filter cloth...

  • 50 square plate and frame filter press parameters

    50 square plate and frame filter press parameters Serial number Name Parameter 1 Specification XAYZG50/800-U 2 Filtration area 50 square metres 3 Filter chamber volume 0.75m3 4 Filter plate Number of filter plates 24 pieces (including head and tail plate) Number of press plates 24 pieces 5 Filter plate Material Filter plate FRPP Press Plate...

  • 40 square plate and frame filter press

    XAYZ40/800-U Technical Parameters XAYZ40/800-U Technical Parameters Specification XAYZ40/800-U Filtration area 40m2 Filter chamber volume 0.6m3 Number of filter plates 38 pieces (including head and tail plate) Specification of filter plate 800×800×60 Filter plate material Reinforced polypropylene Specification of filter cloth 1720×860...

  • Reinforced polypropylene diaphragm filter press XMYZGF700/2000-U

    i. table of technical parameters Serial number Name Parameters 0 Equipment name Reinforced polypropylene diaphragm filter press 1 Specification XMYZGF700/2000-U 2 Filtration area 700 square metres 3 Filter chamber volume 12.25m3 4 Filter plate Quantity Filter plate 50 pieces (including head and tail plate) Pressing plate 50...

  • How to reduce the water content of sludge filter press to 60% and below

    Selection of plate and frame filter press For municipal sludge or sludge with high organic content, diaphragm plate and frame filter press should be selected, i.e., filter press with high pressure water squeezing function, and the actual use of pressing pressure is recommended to be above 1.4Mpa. When the sludge conditioning is done well, the pressure such as 1.4Mpa-2.0Mpa will be able to put the sludge...

  • Fully automatic filter press (plate and frame, diaphragm, chamber)

    The operation of the filter presses is initiated by a single "Start" button in the central control panel. We offer a wide range of fully automatic filter presses with new technology for standard and medium as well as heavy duty performance levels. Maximum flexibility is provided by the choice between simple manual and fully automatic filter press designs. su...

  • Solid-liquid separation filter press

    Introduction to Filter Presses Separation of solids and liquids is done using a filter press. The purpose of the pressure filtration process is to separate solids/liquids. The slurry is pushed into the filter press and dewatered while being subjected to very high pressure. Filter presses are manufactured according to the volume of the slurry to be dewatered and the. suton suton is China's trusted ...

  • Salt Sludge Filter Press Test

    Process flow of the salt mud filter press pilot test Two batches of salt sludge filtration pilot tests were carried out. The effective filter plates of the experimental filter press were three, made of polypropylene, of which the two sides were conventional solid filter plates and the middle was a diaphragm-type filter plate, which produced two pieces of filter cake on both sides of the diaphragm filter plate. The salt sludge filter press...

  • Ceramic membrane brine refining process

    According to the requirements of the process, the near-saturated crude brine is first obtained by salting with warm water, and the appropriate amount of auxiliary materials is put into the crude brine of the former reaction tank, and the crude brine is injected into the folding tank under the operation of the pressurised pump, and then into the refining agent, and then the crude brine is injected into the reaction drum, where it is chemically refined with the auxiliary materials previously mixed in...

  • Introduction to equipment in the brine refining process

    1) Introduction of pre-processor Pre-processor consists of brine inlet system, coagulation mixing chamber, coagulation reaction chamber, inclined plate settling chamber, sedimentation hopper, floating mud tank, fine brine collection chamber extreme overflow pipe, fine brine collection tank and other parts. From the distribution of water flow can be divided into coagulation mixing area, coagulation reaction area, upward folding flow area, floating on...

  • Salt sludge chamber filter press

    1 Salt sludge is the waste produced in the process of refining raw salt in the chlor-alkali industry. China's caustic soda enterprises used in the poor quality of raw salt produced by the amount of salt sludge is relatively large. Enterprise caustic soda production capacity of 210,000 t / a discharge of salt mud containing water mass fraction of about 95% of 190,000 t / a. A large number of salt mud waste directly discharged into the gutter not...

  • Salt sludge filter press to reduce the salt content of chlor-alkali salt sludge

    Caustic soda plant caustic soda production unit original design Scale of 1.5 million t / a small-scale process facilities backward salt sludge treatment process is simple and labour-intensive workers salt sludge after simple treatment will be discharged in the sludge with high salt content not only caused by waste but also caused serious environmental pollution. 2007 the company will be salt sludge from the pipeline outside...

  • Sludge Dewatering Diaphragm Filter Press Commissioning

    I. Project Background Filter Press With the rapid growth of urban population, urban water pollution is facing serious challenges. In order to quickly solve this problem, in recent years, urban sewage treatment plants in large-scale construction, in the process of sewage treatment, the sludge produced has become a new source of environmental pollution, such as treatment is not timely...

Expand More
Welcome to visit our factory!

loading...

en_GBEN